Rottweiler Fuel dongle
Rottweiler Performance fuel dongles 690 2008-2020 & 701 2016-2020
DOES NOT WORK ON THE EU VERSION 2021+
For the EU-5 version (2021+) klik here
The Rottweiler Performance 'Fueling Dongles' are an effective and simple method to improving the fueling mixture of any fuel injected KTM by allowing the stock ECU to deliver a proper mixture at low to mid RPMs. By replacing the stock narrow band O2 plugs with these simple to install dongles, the Rottweiler Fueling Dongles feed the stock ECU a pre set signal that substantially smooths out the lower end power delivery reducing the jerky transition between the extremely lean low RPM mapping and the open loop upper end mapping. Overall average air fuel ratios also tend to richen up by about .5 to 1 point as well allowing the user an inexpensive option to 'bump up' the richness of their fuel delivery if the cost of a Powercommander is not currently an option for them.
How do they work? It's actually quite simple. The stock ECU is set to lean out the fuel delivery to a very lean 14.7 air fuel ratio (AFR) under 5500 RPM and 20% throttle. Once the engine has reached a sufficient warm up the ECU 'listens' to the stock narrow band O2 sensors and looks for a particular signal to keep the bike in that lean condition. This causes heat issues from extremely hot header pipes, makes the motorcycle jerky at low RPMs and reduces power. The Rottweiler Fueling Dongles send a return signal to the stock ECU that keeps the low end fueling at a much better running 13.8 +/-. A mixture that translates into an overall better running motorcycle.
Note: When running our Rottweiler Fueling Dongles, you have the option to remove your stock O2 sensor from the exhaust header. You can plug it with our 12mm O2-plugs sold separately.
In stock
Op vooraad
Deze plug kan niet gebruikt worden in combinatie met de O2 optimiser 2021+
Wil je de O2 sensoren verwijderen uit je bochtenset vanwege het gebruik van de Rottweiler Performance fuel dongles of een power commander V?
de titanium 12mm O2 sensor pluggen speciaal ontwikkeld zodat ze passen voor alle KTM 690-1050-1090-1190-1290 (ecl. RC8) en Husqvarna 701 motoren. Geen goedkope pluggen, maar speciaal geproduceerd
Hoewel het een simpele M12 plug lijkt komt de lengtemaat tot op de milimeter nauwkeurig. Daarnaast is in het ontwerp rekening gehouden met een snelle temperatuur-afgifte. De pluggen hebben een lengte van 15mm, worden geleverd met een crushring, en hebben behalve een gaaf design een kostbare blue-flame nabehandeling gekregen.
Op voorraad
Does not work with the O2 optimiser for the 2021+
Do you want to remove the O2 sensors from your bend set because of the use of the Rottweiler Performance fuel dongles or a power commander V?
the titanium 12mm O2 sensor plugs have been specially developed to fit all KTM 690-1050-1090-1190-1290 (ecl. RC8) and Husqvarna 701 engines. No cheap plugs, but specially produced Although it looks like a simple M12 plug, the length is accurate to the millimeter. In addition, the design takes rapid temperature release into account. The plugs have a length of 15mm, come with a crush ring, and have received a precious blue-flame after-treatment in addition to a cool design.
In stock
Let's face it, the 690 and 701 are great bikes, but the transmissions shift like garbage. The idea is that when you nudge the shifter it should actually go into the next gear. False neutrals in the upper gears and a generally notchy feel to them does't exactly inspire confidence either.
- Virtually eliminate missed shifts and false neutrals. Quicker shifts.
- The 690 has lazy shift action. Not what you want when Super Motard racing or jumping those doubles or splitting that lane.
- The stock shifting, on the KTM 690, can be sketchy under even recreational use.
- Some individual bikes, more than others, have a propensity for false neutrals and missed shifts in critical situations.
- Installation: About 1-2 hours - no case splitting required. The clutch basket doesn't even have to be removed
FITS:
- 2008-2021 KTM 690 Duke / R
- 2008-2021 KTM 690 Enduro / R
- 2008-2024 KTM 690 SMC-R
- 2016-2024 Husqvarna 701 Enduro
- 2016-2024 Husqvarna 701 Supermoto
- 2016- 2021 Husqvarna 701 Sitpilen
- 2016-2021 Husqvarna 701 Svartpilen
- Gasgas 700 sm/enduro 2022-2024
On stock
Op voorraad
The new improved shift star for the ktm 690 /husqvarna 701 (oem ktm)
replacement for nr 76834115001.
if your bike has the old shift star we recommend to change it with the new improved shift star.
Including bolt.
In stock
Zeta Revolver Shift Lever
The Zeta Revolver Shift Lever features a forged aluminum arm for durability and a fold-away tip to lessen the chance of damage in a crash. The tip is eccentric, so rotating it gives the ability to raise or lower it, fore or aft, depending on your preference.
Features:
- Forged A2014 aluminum brake arm
- Black anodized finish with laser print logo
- Shift tip is made of CNC machined aluminum with anodized finish
- Fits the ktm 690 /smc-r /supermoto/enduro all years 2008-2024
In stock
REVOLVER SHIFT LEVER REP. TIP
Replaces the tip of the Zeta lever
23mm
REVOLVER SHIFT LEVER REP. TIP
Replaces the tip of the Zeta lever
28mm
In stock
reusable air filter.
washable fiter from K&N more air more power.
fits the duke 690 2008-2019
on stock
Racing brake disc in flame design.
320 mm diameter, 5 mm thick, black aluminum inner ring, floating. With ABE (112177)
1-5 days
Racing brake disc in flame design.
240 mm diameter, With ABE (110314)
1-5 days
front motomaster sinter brakepads for the duke 690 2015-2019
1-5 days
rear brake pads for the duke 690 2012-2021
(403402)
1-5 days
Bobbins 690
Fitment ktm 690 smc/smcr/enduro/duke 2008-2026
Upgrade both protection and style with these CNC-machined rear swingarm bobbins, designed for KTM motorcycles. Precision-made from high-quality aluminum, these bobbins offer reliable support when using a paddock stand while adding a clean factory-racing look to your bike.
The durable anodized finish ensures long-lasting color and corrosion resistance, even under tough riding conditions. Fitted with a strong steel insert, they provide a secure mounting point and excellent strength without compromising weight.
Whether you’re performing maintenance, cleaning your chain, or storing your bike, these bobbins make lifting your motorcycle quick, stable, and safe.
Key features:
- CNC-machined aluminum construction
- Anodized finish for durability and corrosion resistance
- Steel insert for added strength
- Designed for use with paddock stands
- Perfect fit for KTM models
A small upgrade that delivers everyday practicality with unmistakable KTM race style.
in stock
KTM luxury keychain
Add a subtle touch of KTM attitude to your everyday carry with this KTM Premium Keychain. Designed for riders and enthusiasts alike, this keychain combines durability with unmistakable racing style.
The black strap features the iconic KTM logo in bold orange, finished with contrasting red stitching for a sharp, high-quality look. The robust metal keyring and swivel clip ensure secure attachment while allowing smooth movement, making it practical as well as stylish.
Built to handle daily use, this keychain is perfect for motorcycle keys, car keys, or garage keys—and it makes a great gift for any KTM fan.
Key features:
- Official KTM design
- Durable strap with premium stitching
- Strong metal keyring with swivel connection
- Compact, lightweight, and built for everyday use
A small detail that shows big passion for orange racing spirit.
in stock